How to use solder to connect led strip light? I believe that many people are feeling confused. I will introduce how to use a solder to connect the led strips.
We already know that we can connect led strip lights with rapid quick connectors.The led strip lights are simple to attach.However, there are occasions when the project must ensure that there are no problems for an extended period of time.As a result, soldering is the best option.
To begin, prepare a soldering machine, you can reference led light soldering machine.The temperature of the iron should be adjustable.To clean the tip of the solder gun, use rosin on the iron. When the soldering iron temperature reach 350+/-10℃,tin the cable with solder.
The second step is to solder a little amount of tin to the copper dots of your led strip light.Apply a little amount of tin to the soldering dot.
Tin the wire as well as the copper dots on the led strip light pcb.You may now pair them up.Connect the wire to the copper spots one at a time, using the soldering iron to heat each solder until it melts and becomes one.
Hold for a sufficient amount of time to allow for aging. Connect your freshly soldered LED Strip to an appropriate power supply and test your connection after it has dried. Shrink your heat shrink with a heat gun to protect your solder junctions, then test again.
