1. There are many tips for using a wire stripping machine, which can only be experienced by those who have been using it for a long time. Some problems are something that can only be understood through years of accumulation, such as the small problems and malfunctions that may occur during the use of a wire stripping machine, when we cannot find the cause. Teacher Fu, who has been using it for many years, can tell what caused it. Today, what we are bringing to you is the problem with the tool value of the wire stripping machine in work. The tool value of the wire stripping machine is used to adjust the cutting depth. However, for some wire stripping machines, the cutting depth cannot be directly determined by setting values.
2. For general computer wire stripping machines, although the knife value can control the cutting depth, it is not one-on-one. For example, when the knife value is A, the cutting depth is B, but when the knife value is adjusted to A-1, the cutting depth cannot immediately reach B-1. As general computer wire stripping machines operate and adjust through a single pulse. Therefore, when adjusting the tool value, only fine tune the pitch line until the ideal condition is achieved.
3. So there is no doubt about the one-on-one wire stripping machine with wood, knife value, and cutting depth. Due to the regulation of wire stripping accuracy, the smaller value of cutting depth adjustment for the same axis wire stripping machine series products has reached 0. 01mm, adjust the tool value using the general wire stripping machine method.
