What is a wire cutting and stripping machine? A wire stripping machine is a mechanical device used to strip the outer sheath of wires such as wires and cables.
It is equipped with specific cutters and mechanical structures according to the stripping requirements, and can accurately and efficiently remove the insulation outer sheath of the wire. At the same time, it can be cut to a specified length as needed to meet the requirements of wire processing, connection, installation and other processes. The emergence of wire stripping machines has greatly improved the efficiency and quality of wire processing and reduced the labor intensity and errors of manual operations. It is commonly used in industries such as electronics, electrical, and wire and cable production.
So, what are the common faults and solutions during the use of the wire cutting and stripping machine?
The following are some common faults and solutions during the use of the wire cutting and stripping machine:
Common fault 1: Inconsistent wire cutting length
Solution:
1. Check whether the wire feeding wheel is worn. If worn, replace it.
2. Calibrate the length measuring device to ensure its accuracy.
3. Check whether the wire feeding is smooth and whether there is any jamming.
Common fault 2: Uneven or unclean stripping
Solution:
1. Adjust the position and depth of the stripping tool.
2. Replace the worn stripping tool.
3. Check whether the wire is placed correctly and ensure that it is centered in the processing position.
Common fault 3: Abnormal noise during machine operation
Solution:
1. Check whether the connection of each component is loose, and tighten the loose screws and connectors.
2. Add lubricating oil to the transmission components to reduce friction noise.
3. Check whether the transmission components such as gears and belts are damaged. If damaged, replace them in time.
Common fault 4: Frequent equipment shutdown
Solution:
1. Check whether the power connection is stable and ensure that the voltage is normal.
2. Check whether the control circuit is faulty, repair or replace damaged electronic components.
3. Check whether the sensor is working properly, clean or replace the faulty sensor.
Common fault 5: Uneven tangent cut
Solution:
1. Replace the worn or damaged tangent tool.
2. Adjust the pressure and angle of the tangent tool.
It is especially important to note that when troubleshooting and repairing, be sure to turn off the power of the equipment first to ensure personal safety. If you are not familiar with equipment maintenance, it is recommended to contact a professional technician for processing.
