Automatic wire stripping machine is a very popular wire harness processing equipment at present, with complete functions and various processing methods. For example, cutting, peeling, half peeling, middle peeling, twisting and other functions can be achieved. A multi-purpose automatic wire stripping machine can be said to be a good helper for wire harness processing. And is it difficult to operate this device?
Before homework
1. Before operation, the operating staff shall strictly follow the inspection system for such equipment and make records;
2. Before starting the machine, it is necessary to check whether all accessories are installed correctly and confirm that there are no problems before starting the machine.
3. Confirm that the cutting mold is intact, installed reliably, and well lubricated;
During homework
1. According to the requirements of the process documents, adjust the stripping length of the cable and core wire, adjust the positions of the upper and lower (left and right) cutting knives, check whether the compressed air supply is normal, adjust the air flow rate of the cylinder, plug in the power supply, and use a foot switch to control the equipment to start running.
2. After cutting several pieces, inspect the length and core wire quality of the product to ensure compliance with the process documents. After passing the inspection, the product can be started up normally for continuous production.
3. During the wire stripping process, hands should not enter the inside of the protective cover to prevent machine injury.
4. Halfway shutdown, please unplug the power plug to ensure that people leave and the machine is powered off, in order to prevent others from accidentally stepping on the foot switch and causing pinch injuries.
5. If the wire stripping blade needs to be replaced, it must be powered off and stopped before replacement can be carried out.
6. If any abnormal situations are found during use, the power should be immediately cut off and professional maintenance personnel should be notified for maintenance.
7. During the operation, the operator should be focused and strictly prohibited from doing anything unrelated to production.
End of assignment
1. After the production plan is executed, the equipment power should be turned off;
2. Before leaving work, the main power supply of the equipment should be turned off, and the machine and surrounding area should be cleaned.
At present, the era of machine automation is becoming increasingly popular, and people's requirements for wire harness processing equipment are definitely increasing. The technology of automated wire stripping machines is currently very mature, so it is necessary to have a good understanding of the relevant mechanical equipment. I hope this safety operation regulations for automatic wire stripping machines can help you.
