The installation method of the wire stripping machine blade varies depending on the model, and the following are the general installation methods:
Step 1: Prepare tools and materials: the wire stripping machine host, the wires and cables to be stripped, the special power supply for the wire stripping machine, the wire stripping machine control circuit board, and the wire stripping machine transmission components.
Step 2: Install the host and power supply, place the wire stripping machine host on a flat workbench, and place the wires, cables, etc. to be stripped above the conveyor belt. Connect the dedicated power supply of the wire stripping machine to the wire stripping machine host.
Step 3: Connect the control circuit board and transmission components to connect the wire stripping machine control circuit board to the wire stripping machine host. Connect the transmission components to the conveyor belt of the wire stripping machine.
Step 4: Set parameters according to different wires and cables waiting for peeling, and set the parameters of the stripping machine. This includes the input voltage, output voltage, stripping length, etc. of the stripping machine.
Step 5: Install the blade of the wire stripping machine in the corresponding position, ensure that the blade is parallel to the conveyor belt, and align the guide groove of the blade with the direction of movement of the conveyor belt.
Step 6: Connect the dedicated power supply of the wire stripping machine to the wire stripping machine host and turn on the power supply. Step 7: Start up and run. Press the start button of the wire stripping machine to start working.
The above is the general installation method for wire stripping machine blades, and the specific installation method may vary depending on the model. When installing the blade, it is important to keep the wire stripping machine clean and dry to avoid affecting the service life of the blade.
