Automatic wire stripping machine is a common electronic tool used to strip the plastic insulation layer on the outside of the wire in order to expose the copper wire inside. The following is the method of using an automatic wire stripping machine:
Preparation of wire: Fix the wire that needs to be stripped onto the stripping base of the stripping machine. Ensure that both ends of the wire are fixed to prevent the wire from moving during the stripping process.
Set the stripping length: Adjust the stripping length controller of the stripping machine to determine the length of the insulation layer to be stripped. Usually, a wire stripping machine has a dial or dial that can be rotated or moved to set the wire stripping length.
Start the wire stripping machine: Press the start button or switch of the wire stripping machine. The wire stripping machine will automatically operate and strip the insulation layer of the wire.
Adjusting the stripping speed: Some stripping machines have a speed adjustment function that can be adjusted based on the type and thickness of the wire. If the wire stripping speed is too fast, it may cause damage to the wire or excessive tearing of the insulation layer.
Remove the wire: After the wire stripping is completed, remove the wire from the wire stripping machine. Be careful not to let the copper wire of the wire come into contact with the blade of the wire stripping machine to avoid damaging the copper wire.
Clean the wire stripper: Use a tool knife or other tool to remove any insulation residue from the wire stripper blade. If there are wire debris or other debris on the wire stripping machine, it should be cleaned in a timely manner to avoid affecting the wire stripping effect.
When using an automatic wire stripper, it is important to pay attention to safety and ensure that fingers and clothing are kept away from the wire stripper blades. In addition, the appropriate wire stripping machine model and speed should be selected based on the type and thickness of the wire to achieve the best wire stripping effect.
